/PS3-DualShock3-5c37de72c9e77c00010d00fa.jpg "pair dualshock 3 pc")
- PAIR DUALSHOCK 3 PC INSTALL
- PAIR DUALSHOCK 3 PC DRIVERS
- PAIR DUALSHOCK 3 PC DRIVER
- PAIR DUALSHOCK 3 PC BLUETOOTH
- PAIR DUALSHOCK 3 PC PS3
PAIR DUALSHOCK 3 PC PS3
Now that the PS3 controller is connected to your computer via Bluetooth, you can use it in any game that supports gamepads. This usually isn't required on newer Macs. If your Mac prompts you for the device's passcode, type 0000 and click Pair.
Enter 0000 as the passcode if prompted. It may take a moment, but the PS3 controller will appear in the list as "Connected." Unplug the controller and wait for it to sync. You should see the lights start to flash on the top of the controller. Press and hold the PlayStation button for 2 seconds. PAIR DUALSHOCK 3 PC BLUETOOTH
If the controller hasn't been charged for a while, you may want to let it charge for about 30 minutes before proceeding with setting up the Bluetooth connection.
Let the controller charge (if necessary). You can use the one that came with your controller or any other Mini-USB cable. Connect the PS3 Controller to your Mac via USB. If you don't see this option, click the ⋮⋮⋮⋮ button to return to the main System Preferences menu. You'll see this in the upper-left corner of the screen. If you have a PS3 nearby that you normally use your controller for, turn it off and unplug it to prevent accidentally turning it on while you pair the controller with your Mac. Simply turning the paired controller on will sync it with your Android. The pairing process will not be necessary in the future. In many games, you won't need to configure anything and can begin playing with the controller immediately. Each game will have a different controller configuration process. If you're using Steam, look for "Full" or "Partial Controller Support" in the game's Details. Start a game that supports controllers. Check the boxes for each DualShock 3 controller. Click Choose DualShock 3 controllers to install. 
If you have multiple dongles installed, make sure you're selecting the one you want to dedicate to PS3 controllers.
Check the box for your Bluetooth dongle. Click Choose Bluetooth dongles to install. This appears at the end of the installation process. PAIR DUALSHOCK 3 PC DRIVER
Click the Run Driver Installer button. This will begin the installation process. This will begin downloading the installer. This is a utility created to allow the PS3 controller to appear in games as if it were an Xbox 360 controller (which is fully supported in Windows). PAIR DUALSHOCK 3 PC INSTALL
Allow Windows to install the default drivers. Make sure you connect all of the controllers that you plan on using before you start the setup process.
Connect all of the PS3 controllers that you want to sync via USB. PAIR DUALSHOCK 3 PC DRIVERS
Allow Windows to install the default drivers automatically after connecting it. Even if your computer already has Bluetooth support, using a separate dongle is recommended since only PS3 controllers will work with it after setup. If you plan on using your PS3 controllers wirelessly with your PC, connect a Bluetooth dongle to an open USB port on your PC. Connect your Bluetooth dongle to your computer (optional). Try connecting and syncing the controller again. Use the paperclip to press the Reset button. You can find it along the top of the backside, near the L2 button. Turn over the controller and locate the Reset button. If you still can't get your controller to sync with the PS3, you may need to reset it: Reset the controller if it still won't sync. Keep it plugged in for a few hours with the PS3 on to charge the battery. If your controller turns off after unplugging it, it may be out of charge. Charge the controller if it doesn't stay on. Bluetooth wireless functionality is only available on official Sony DualShock 3 controllers. 
You can now use the controller wirelessly.
Disconnect the USB cable from the controller. 
The light that is on indicates which controller you are using (P1, P2, etc.). Once a single light is on, your controller is synced with the PS3.
Wait for the controller lights to finish blinking. You'll find this button in the center of the controller. Press the PlayStation button on the controller. You'll find two or four on the front of your PS3, depending on the model. Connect the other end to a USB port on the PS3. You'll find the Mini-USB port on the back of the controller. Connect a Mini-USB cable to your controller. Press the Power button on the front of the console.
0 kommentar(er)
